Skip to main content
Version: 1.7

Victron SmartLithium

Victron's managed lithium battery. Sensa shows its cell health on its own, and its full state of charge when it is wired to a Victron Cerbo GX.

How it connects​

Two ways:

  • Bluetooth, through a Bluetooth proxy or the Sensa unit's own Bluetooth, within reach of the battery.
  • Through a Victron Cerbo GX, with the battery wired to the Cerbo's BMS-Can or VE.Can port. The Cerbo needs MQTT on LAN turned on in its own settings.

Add to Sensa Nomad​

Open Settings, choose the Devices tab, tick it under Discovered and press Add Selected Devices. If it is not there yet, press Scan.

On Bluetooth, Sensa asks for the battery's Encryption key when you tick it. You find it in the VictronConnect app under Settings, Product info, Instant readout via Bluetooth, Show. You enter it once.

Through a Cerbo GX, add the Cerbo and the battery's readings come with it.

See Adding devices for more.

What you see​

The battery appears on the BMS tab of the Habitation dashboard.

  • Over Bluetooth: battery voltage, each cell's voltage, temperature and whether it is balancing.
  • Through a Cerbo GX: all of that, plus state of charge and state of health.

Good to know​

  • No state of charge over Bluetooth. That is how Victron designs it: the battery leaves charge to a shunt or Cerbo. If you also have a Victron SmartShunt, it shows your system's charge separately.
  • No cell spread alert. The Battery cell imbalance instinct shows as Unavailable for this battery.