Skydance WZ5 5-in-1 LED controller
A Zigbee LED controller that can drive a plain white, warm-to-cool or full colour strip. Each controller is one light in Sensa, with a card on the Lighting tab.
How it connects
The controller uses Zigbee, so you need a Zigbee coordinator added to Sensa first, such as the SMLight SLZB or the Sonoff Dongle M.
The mode for your strip is set on the controller itself, with its match button. The colour of its RUN LED shows which mode it is in.
Add to Sensa Nomad
Open Settings, choose the Devices tab and press Pair Zigbee, then put the controller into pairing mode. Sensa adds it as soon as it joins, and it moves to Added.
If it has been paired before and is waiting under Discovered, tick it and press Add Selected Devices. If it is not there yet, press Scan.
See Adding devices for more.
What you see
A card on the Habitation Lighting tab with a power button and brightness, plus a warm-to-cool slider or a colour picker depending on the mode. Sensa reads the mode from the controller, and the device row shows a small coloured dot matching its RUN LED. See Lighting.
| Mode | RUN LED | Controls you get |
|---|---|---|
| DIM | White | Brightness |
| CCT | Yellow | Brightness and warm to cool |
| RGB | Red | Full colour |
| RGBW | Green | Full colour |
| RGB+CCT | Blue | Full colour |
Good to know
- Controls wrong for your strip? Set Light Type from the cog on the controller's row on the Devices tab. See Correcting it yourself.
- A new batch may not be recognised. It shows as ZIGBEE? and can still be added: pick the Light Type matching its RUN LED. See If Sensa does not recognise your controller.
- Fed from a relay? Power-On Delay and Leave Relay On are on the same cog. See Lights fed from a relay.