Skip to main content
Version: 1.7

Lucky Bitcoin Miner LV08 Pro

A small Bitcoin miner that runs off your 12V leisure system. To the van it is an electric heater that happens to earn money, and Sensa can run it on spare solar and stop it before the van gets too warm.

Included in Pro and Vision.

How it connects​

It connects over Wi-Fi, 2.4GHz only, and has no network socket. To put it on your van's Wi-Fi, join the miner's own Wi-Fi hotspot, named Lucky_ followed by a few characters, from your phone. A setup page opens in your phone's browser, where you choose your van's Wi-Fi.

It runs on 12V DC and draws up to 15A.

Add to Sensa Nomad​

Once the miner is on your van's network, Sensa finds it on its own. Open Settings, choose the Devices tab, tick it under Discovered and press Add Selected Devices. If it is not there yet, press Scan.

See Adding devices for more.

What you see​

A Crypto tab appears on the Habitation dashboard. It shows each miner's speed and temperature, the heat they are putting into the van, the earnings so far and the power they are taking, with controls to run them by hand or leave them to Autopilot. See Crypto mining.

Good to know​

  • Feed it from a relay channel if you want the Master power cut and Autopilot to switch it. On the Switching tab of Settings, set the channel's Device Type to the miner, picked by name.
  • Earnings are an estimate. The miner only earns once it is pointed at a mining pool.
  • This model carries the Unverified label in the Devices list. See Supported devices for what that means.