Skip to main content
Version: 1.7

Bluetooth Proxy

A Bluetooth proxy is a relay that extends Bluetooth's reach around your vehicle. Even if your server has a bluetooth sensor, there is a limit to the number of active connections a sensor can maintain. We always recommend an additional bluetooth proxy especially if connecting to your battery BMS via bluetooth.

Join Wireless Network​

Steps:

  1. On your mobile or another wireless device, a new wireless SSID should appear named sen-setup-btp. Join this network, the password is sensasetup

  2. You will then be presented with a list of all the SSIDs available, select YOUR wireless network and enter YOUR wireless password.

Bluetooth Proxy web interface
  1. Power off the device and power on. The device should then join your network.

Running Web Interface​

The device has a basic web interface which is useful to ensure the device is running and check the logs.

Steps:

  1. Identify the IP address of the device from your wireless network. You should see a device named ss-bt-proxy-c008-xxxxxx (Atom Lite) or ss-bt-proxy-c124-xxxxxx (AtomS3), where xxxxxx is the last 6 characters of the MAC address of the unit. That is used to make them unique in case you have multiple proxies on the network.
  2. Connect to your ip address in your browser
  3. You will be prompted for a user and password, user: admin, password: sensaweb

Bluetooth Proxy web interface

Add to Sensa Nomad​

Your Bluetooth Proxy arrives with its firmware installed. Once it is on your van's network, Sensa finds it on its own. Open Settings, choose the Devices tab, tick it under Discovered and press Add Selected Devices. If it is not there yet, press Scan.

The Devices tab, with the Sensa Bluetooth Proxy ticked and ready to add

See Adding devices for more.