Applies to: Nomad Release Track: Stable Version: 1.9 Requires action: No

Summary​

This is the release where your van starts looking out for you. It watches the sky before you set off, keeps the recovery number to hand if you break down, tells the people you love when you press SOS, and quietly takes care of the fiddly setup jobs so you can get on with the trip.

Applies to: Nomad Release Track: Stable Version: 1.8 Requires action: No

Summary​

See how SensaClimate has been doing and what your diesel is costing, Frost Protection straight from the heater card, and more Mopeka sensors.

Applies to: Nomad Release Track: Stable Version: 1.7 Requires action: No

Summary​

Set one temperature and let the van hold it, the Autoterm Baltica on screen, frost protection that works even with Sensa off, and a count of how many days of diesel you have left.

Applies to: Nomad Release Track: Stable Version: 1.6 Requires action: No

Summary​

A simpler Network tab, an alarm if the van is driven off while you are away, your diesel heater on screen, and a Design Mode so the screens only move when you mean them to.

Applies to: Nomad Release Track: Stable Version: 1.5 Requires action: No

Summary​

Talk to your van with a Home Assistant Voice device, see how far you are leaning on a rough track, and put your tabs in the order you want.

Applies to: Nomad Release Track: Stable Version: 1.4 Requires action: No

Summary​

Tyre pressure on the Cab screen, a History tab that looks back over a season, and Nerd Mode, one button that keeps the technical detail out of the way until you want it. Routines can now do several things at once and start a scene. Three new devices, a light theme, and a handful of settings that forgot themselves after a restart now remember.

Applies to: Nomad Release Track: Stable Version: 1.3 Requires action: No

Summary​

Routines, the behaviours you build yourself: what starts it, what else has to be true, and what happens. A Zigbee button you can give a job to. Your Teltonika router and switch now update from Sensa, each with its own automatic updates switch. Scenes now set an LED strip's animation as well as its colour. And when Zigbee stops, the van tells you rather than going quiet.

Applies to: Nomad Release Track: Stable Version: 1.2 Requires action: No

Summary​

Lights you can group and drive as one, with new cards, a colour wheel and an order you choose. Scenes now remember how a light looked, not just whether it was on. Every popup, button and save in the app works the same way. A message in the Log tells you what raised it and takes you there. And a Cerbo GX picks up whatever you plug into it without being removed and added again.

Applies to: Nomad Release Track: Stable Version: 1.1 Requires action: One small thing, under Settings, described first below.

Summary​

Settings is open to everyone on the van, with a PIN if you want one. Scenes are yours to reorder, rename, hide and add to. A camera shows you the drain while you dump grey water. Five new instincts watch your batteries, fridge and freezer. Automatic updates now wait for your maintenance window. And a long list of smaller fixes, including two readings that showed the wrong number on real vans.

Applies to: Nomad Release Track: Stable Version: 1.0.9 Requires action: No

Summary​

One small display fix. Most people will not have noticed anything was wrong.